AOI-OL Rigid Board On-line Optical Inspection Equipment
TZTEK AOI-OL On-line Optical Inspection Equipment integrates multiple technologies such as TZTEK optical inspection, independent Cam resolution and AI deep learning, with characteristics of high precision, high resolution and high efficiency. Connecting the etching line can automatically detect the size and thickness of the board, and automatically adapt to achieve the optimal drawing effect, which greatly reduces labor costs. Can be widely used in various PCB inner and outer layer inspection.
SPECIFICATION PARAMETER
| Model | AOI-OL25 | AOI-OL15C | AOI-OL12C | AOI-OL10C | |
| External dimensions（mm） | 2100×1534×2000（L×W×H） | ||||
| Equipment weigh（t t） | 1.4 | ||||
| Equipment powe（r Vac,Hz,KW） | 380，50，16 | ||||
| Processing method | Fully automatic double-sided scanning | ||||
| Inspection area(mm) | 300×300（MIN） | 650×750（MAX） | |||
| Camera type | Monochrome line scan camera | Monochrome / Color line scan camera | Monochrome / Color line scan camera | Color line scan camera | |
| Reference material format | Gerber (RS274X)、ODB++ | ||||
| Detection board thickness(mm) | 0.05-5 | ||||
| Defect confirmation | VRS off-line decision | ||||
| Minimum line width / line spacing（mil） | 4/4 | 3/3 | 2/2 | 1.5/1.5 | |
| CT（pnl/h） | 550 - 800（ Depend on camera resolution and test board size） | ||||
| Defect range | Open circuit, short circuit, notch, convex copper, exposed steel, pinhole, oxidation, scratch,residual copper, through/blind/plug hole, film clamping, adhesive stain, etc. | ||||
| Copper thickness range | Within 3 oz | ||||
| Detection material | Can be used for FR4, FR5, aluminum substrate, RTF, etc. | ||||
| Temperature and humidity | 22±2℃ ， 50±10% | ||||
