AOI-M series Optical Inspection Equipment
TZTEK AOI-M series Optical Inspection Equipment combines many technologies such as TZTEK optical detection, autonomous Cam analysis and AI deep learning, as well as the detection and measurement integration equipment. It combines the traditional algorithm with AI algorithm to effectively perform false point filtering. It has a variety of resolution options, can adapt to different application scenarios, good detection effect, high degree of automation, low maintenance cost, and can be widely used in PCB, FPC, IC carrier board circuit detection.
SPECIFICATION PARAMETER
| Model | AOI-M10 | AOI-M05 | |||
| External dimensions（mm） | 1962×1490×1820（L×W×H） | ||||
| Equipment weigh（t t） | 1.1 | ||||
| Equipment powe（r Vac,Hz,KW） | 380，50，7 | ||||
| Processing method | Manual loading and unloading | ||||
| Camera type | Monochrome / Color line scan camera | ||||
| Inspection area(mm) | 600×600（MAX） | ||||
| CT（s/side） | 24（Taking 500×400 mm product as an example） | 50（Taking 400×250 mm product as an example) | |||
| Reference material format | Gerber (RS274X)、ODB++ | ||||
| Detection board thickness(mm) | 0.06-2 | ||||
| Minimum line width / line spacing（mil） | 2/2 | 1/1 | |||
| Defect confirmation | AOI online confirmation + VRS split confirmation | ||||
| Defect range | Open circuit, short circuit, notch, convex copper, exposed steel, pinhole, oxidation, scratch,residual copper, through/blind/plug hole, film clamping, adhesive stain, etc. | ||||
| Copper thickness range | Within 3 oz | ||||
| Detection material | Can be used for FR4, FR5, aluminum substrate, RTF, etc. | ||||
| Temperature and humidity | 22±2℃ ， 50±10% | ||||
